Home > Tintri VMstore™ > Knowledge Base > T6xx/T8xx Controller doesn't boot after replacement

T6xx/T8xx Controller doesn't boot after replacement

Applies To

 

Product(s)

Version(s)

Hybrid Flash Array

T6xx, T8xx

Description

After replacing or reinserting a controller in a T6xx or T8xx VMstore, it doesn't power on and boot up.

 

Symptoms

Controller doesn't power on and boot up.

 

Resolution

 

Please try pressing (do not hold down) the Power button.

 

Figure 20 Tintri VMstore T600 System.

 

Note:

After powering up the controller, make sure the system is up and running. If the battery on the NVRAM card is not fully charged, the system may take as much as five minutes to power up. The LEDs on the control panel flash momentarily. If the controller has NVRAM cards, the LEDs will not turn on until the controller is powered up. The replacement controller automatically updates to the current OS version running on the VMStore, and the BIOS clock automatically updates during shutdown or reboot. 

 

Viewing 2 of 2 comments: view all
Technical review complete
Posted 13:57, 4 Sep 2017
Minor edits done. Checked for dupes. Moved to final.
Posted 05:48, 17 Sep 2017
Viewing 2 of 2 comments: view all
You must to post a comment.
Last modified

Tags

Classifications

This page has no classifications.